When the phone can be locked, and when it cannot
There are two ways a video reaches the TV.
- The TV plays it directly. The TV, or Cast Browser's cloud relay on its behalf, fetches the stream. The phone only sends commands, so you can lock it, switch apps, or take a call. This is the usual case.
- The phone passes the video along. Some videos can only be loaded by the phone that opened the page. Cast Browser then forwards the video to the TV, and iOS may pause that work when the app is in the background for long. For these videos, keep Cast Browser open and the phone awake.
If a video stops every time the phone locks, it is the second kind. Check the Video List for another source for the same video. An MP4 or HLS version usually plays directly.
"The connection to the playback device was lost. Reconnect and try again."
The phone can no longer reach the TV. Common causes:
- The TV or streaming stick went to sleep or was switched to another input that powers the receiver down.
- The phone moved to a different Wi-Fi network or onto mobile data.
- The Wi-Fi signal dropped at the phone or the receiver.
Open the Video List, select the video, and choose the TV again. Cast Browser remembers how far you got, so the video appears under Keep Watching on the home page.
If you see "The connection to the playback device is taking longer than expected. Keep the app open while it reconnects.", leave the app on screen for a few seconds. It is trying to restore the session by itself.
"Your TV stopped playing this live stream. Try casting it again."
Live streams have no fixed end, and a TV that falls too far behind may give up. Cast the stream again to rejoin it at the live point. Repeated drops on a live stream usually point to a slow connection at the TV.
"The media stopped playing. Refresh the source and try again."
The video's address stopped working partway through. Many sites issue addresses that expire. Go back to the page, reload it, and cast the video again.
Make drops less likely
- Keep the receiver within good range of the router. Streaming sticks behind a TV often have the weakest signal in the house.
- Stay on one Wi-Fi network. Turn off the VPN on the phone while casting.
- Check that Casting Widget is on under Settings, then Advanced. It puts playback controls on the Lock Screen and in the Dynamic Island, so you can check on the cast without opening the app.
- If the TV has an energy saving mode that turns off networking in standby, leave the TV fully on while you cast.
Still happening?
Use Settings, then Report a Problem right after a drop, or email contact@castbrowser.com with the TV model and roughly how long the video played before it stopped.
Related
- Video will not play on the TVThe TV connects but nothing plays, or you see "Unable to Cast" or "Unable to Play".
- TV or Chromecast not showing upThe device list says "No Chromecast devices found" or "No DLNA devices found".
- Screen mirroring vs casting: what is the difference?Mirroring copies your screen. Casting hands the TV the video. When to use each.