TV or Chromecast not showing up

An empty device list almost always comes down to the network or the Local Network permission. Put the iPhone and the TV on the same Wi-Fi, make sure Local Network access is on for Cast Browser, wake the TV, and tap Search Again.

Updated

What you see

On the Choose Device sheet, the Chromecast section says "No Chromecast devices found." or the DLNA / UPnP section says "No DLNA devices found." You may also see "Searching for devices…" that never resolves, or a device that shows "Connection timed out. Tap to retry."

Checklist

  1. Use the same Wi-Fi network on both devices. Check the network name on the iPhone and in the TV's network settings. A TV on a guest network, or a phone on mobile data, will not find each other.
  2. Turn on Local Network access. On the iPhone, open Settings, then Apps, then Cast Browser, and switch on Local Network. If this is off, iOS hides every device on your network from the app.
  3. Wake the TV. Turn it on and leave it on its home screen for a few seconds. A TV or streaming stick in standby often does not answer.
  4. Tap Search Again at the bottom of the device list. Devices appear as they respond, which can take a few seconds.
  5. Disconnect any VPN on the iPhone. Many VPNs block traffic to devices on the local network.
  6. Restart the receiver. Unplug the Chromecast or TV for ten seconds, plug it back in, wait for it to rejoin Wi-Fi, and open the device list again.

If it is still missing

Router isolation

Some routers, mesh systems, and most hotel, dorm, and office networks stop wireless devices from seeing each other. The setting is often called client isolation or AP isolation. Casting cannot work on such a network. On a home router you can switch it off in the router's settings.

Two networks with similar names

Routers often broadcast a 2.4 GHz and a 5 GHz network. These normally work together, but if casting fails, try joining the phone to the same band the TV uses.

Your TV does not support Google Cast or DLNA

Cast Browser finds two kinds of receiver: Google Cast devices and DLNA receivers. Roku devices, Fire TV Sticks, and Apple TV are none of these, so they do not appear. See the guides for Roku and Fire TV.

Google Cast is switched off on the TV

On TVs with Google TV or Android TV, the Google Cast receiver is a system app that can be disabled. Check the TV's app settings and enable it.

The device appears but will not connect

"Connection timed out" means the app found the device but the device did not answer in time. Tap the device to retry. If it keeps happening, restart the receiver and move the phone closer to the router. Weak Wi-Fi at either end causes most timeouts.

Still stuck?

Open Settings in Cast Browser and tap Report a Problem, or email contact@castbrowser.com with your TV model and what the device list shows.

Related

Chromecast, Google Cast, Google TV, and Android TV are trademarks of Google LLC. AirPlay, Apple TV, iPhone, iPad, and Safari are trademarks of Apple Inc. Other product names belong to their owners. Cast Browser is independent and is not affiliated with or endorsed by any of them.